1 / 2
Extruder motor w/gearbox top mount for 1515 Kossel Mini — zdjęcie 1
1 / 2

Extruder motor w/gearbox top mount for 1515 Kossel Mini

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An extruder motor top mount for a 1515 Mini Kossel. Snuggly mounts a 17HS19-1684S-PG5 geared stepper motor. I used it…

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
212
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

An extruder motor top mount for a 1515 Mini Kossel.Snuggly mounts a 17HS19-1684S-PG5 geared stepper motor. I used it to mount the extruder to the top, near the filament spool. Source available to adjust sizes. One of the days, I may turn it into a customizer. Mounts to the top slot of a 1515 bar, for those of us that didn't put enough spare nuts in the side slots for future accessories. :)

Print Settings

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.2

Infill:

20

Notes:

I printed at 180° with Hatchbox PLA, bed heated to 70°.

I recommend either using a slicer with easily removable support or a dual extrusion system with dissolvable support material for the mounting tab.

Post-Printing

Post print

Depending on the tolerance of your printer, you may need to file just asmidgen from the inside of the mount cavity -- it's designed as an exact fit for the 17HS19-1684S-PG5 motor, as printed on my printer, which means any extrusion variation may require slight adjustment/relief.

Category: 3D Printer Parts

Tagi