Tape Measure Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Tape measure mount to screw to the cabinet or wall. Counter sunk # 6 screw holes. Spent way to much time with…
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 306
- Wydruki
- 6
- Wyświetlenia
- 1144
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple Tape measure mount to screw to the cabinet or wall.
Counter sunk # 6 screw holes.
Spent way to much time with the caliper at Home Depot determining the average width and height of the center section. Should work with almost every clip style tape measure on the market.
My first upload.
Kinda a no-brain'r but.... print facing down like in the image to avoid supports.
3 layers on the outer....Also did this with a 60% infill in a gyroid pattern even though that's pry overkill.
6 months later and still holding up great in PLA+
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
60
Filament: Duramic PLA+ Black
Category: Tool Holders & Boxes