C920/2/X Ball Joint Mount - without disassembly | for Articulating Camera Mount for Prusa MK3 and MK2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to keep the camera intact, being afraid of breaking something during disassembly. So designed something fit
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
My use case for this was to complete the build from Tnever's design, hopefully they share the missing files one day!
https://www.printables.com/model/247829-logitech-c920-camera-monitor-mount-with-swivel/
I printed it in Prusament PETG orange and am also sharing a photo of the part I'm replacing from the linked build.
Parts to print from Tnever's design:
- 1x monitor-mount_v8.stl
- 1x BallNut.STL
- 1x mfLink_90_1.STL
- 2x Thumb_Bolt_1.STL
- 1x Thumb_Nut.STL
- optional: 1x WebCamera_ShieldFlipCover.stl
- optional: 1x WebCamera_ShieldMount.stl
If I find time and motivation, I will probably find a way to make the monitor mount more universal as it does not match the form of my monitors. And I'm still figuring out the intended mounting mechanism. With the center of gravity moving about, it doesn't seem to hold well.. Especially since my intent is to record facing down as shown in my photo. I used double sided adhesive to hold it's position, which I want to design eventually not needing it.