1 / 1
Car33
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Standard Digital File License
If you are printing for the Community Print Drive, be sure to use the appropriate guidelines: 2025 Christmas Community Print Drive Printing Guidelines
Note: This is not officially approved for the drive, yet.
Required
- .3 layer height or less
- 2 perimeters or more
- 4 bottom layers or more
- 4 top layers or more
- 12% infill or more
- No supports
- SILK Filaments (add 2 perimeters and add 5% to infill)
Recommended
- .2 layer height
- 3 perimeters
- 5 bottom layers
- 5 top layers
- 15% infill
- No supports
- SILK Filaments (double perimeters and add 10% to infill
Note: I recommend putting a modifier block under the middle area of the car and switching the bridge direction to 90 degrees.
Available Profiles
No Split Version - Works on A1 Mini and above build plates
Painted Version - 2 Plates, Prints Seperately
Car Frame by itself - Works on A1 Mini and above build plates
Tire Frame by itself - Works on A1 Mini and above build plates