Sy's Peglock - Kobalt Plier Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1" Pegboard Mounted Holder For Kobalt Pliers (Both Standard And Needle Nose) - OLDER STYLE PLIERS
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a 2-peglock holder for Kobalt pliers, both standard and needle nose, using Sy's system.
IMPORTANT NOTE: This holder works with the older version of Kobalt pliers, I do -not- know if it will work with the version currently offered at Lowes. I have had these pliers for many years, I don't know how much the grip and head designs have changed, except that they -have- changed.
The holder provides a snug fit for the standard version pliers and a relatively loose but stable fit for the needle nose version.
Examples in the photo were printed in PETG. I printed them beefy with 4 wall loops, 5 top and bottom shell layers (1mm ea.), and 30% infill, which is likely overkill. I did print them “upside down” with the lock openings facing up to minimize the supports needed, but are still required.