Wall Hook for Bikes, Yard Games etc.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
U- Shaped wall hook that mounts with a single screw and a sheetrock anchor (recommended).
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 93
- Wydruki
- 2
- Wyświetlenia
- 298
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a way to hook bikes and other things to the wall in my garage to save space. Made this guy and seemed to work well. Will hold light bikes off the ground. Would not recommend holding adult sized bikes, instead hook the handlebars into the hooks and have back tire resting on the ground.
Print with any layer height, I used 0.20mm. Use at least 3 perimeters and 25% infill.
Designed around this Sheetrock Anchor…https://www.homedepot.com/p/Triple-Grip-8-1-1-4-Gray-Ribbed-Anchors-with-Screws-100-Pack-171K/202527079
The Major Diameter of the screw thread is 0.17" or 4.31mm, in case you want to source a different screw. As long as it is around that size it should be fine.