Dryer for paint store chips and mini figs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Paint store sample and match dryer. Can be used to dry minis and other things.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I work at a paint store, and we are always using a hair dryer to dry wet samples when we are matching colors. We have used everything from an aluminum lined box and taped up paint grids as shelves to a five gallon bucket with a small opening for the hair dryer. All of them have their issues from available space on our table to how long its going to last. I've been prototyping various options and this is where I landed.
This dryer box has a good size opening that allows us to pass house siding through it. I made a shelve for the second layer so you can put multiple samples. This second level allows air to flow through to the bottom level so you can dry multiple pieces. I also added feet to it to allow for the bottom to expand evenly as hot air is used. I found that without the feet as the inner walls heat up, the outer walls were being cooled by our metal table. The feet allows for heat to distribute more evenly through the box eliminating cracking. The feet have been given a wider stand to also give it more stability, and it will be less prone to tip over. I do recommend using TPU to print the feet, this will also help it grip a metal table, or really any surface better.
I can see how it can be used in also other applications. So to you I say have fun with it. Let's see how other use it.
The feet are set to be held by M3 screws. I also used M3 heat-set inserts in the feet themselves.
- Print the box on its end.
- Infill: 15%
- Walls: 3
- PETG or ABS to handle the heat better