Mac Quadra650 Speaker Mount for Quadra 700
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Speaker mount for Quadra700 with 650 logic board installed
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This 3D-printable speaker mount allows a Quadra 650 speaker to be installed in a Quadra 700 when using a 650 logic board.
This model was created by Kero's Mac Mods team, Alan Williams under the supervision of Kay Koba.
The mount is designed for Quadra 700 cases with a 650 speaker. Print everything, glue it all together, and assemble it. Use super glue. *Print two for tab2.stl, and one for each of the others.
The speaker is secured with four screws, but use the original Quadra650's screws.
The locking tab can be omitted to prevent damage, but even if omitted, the case lid will still hold the speaker securely in place, preventing wobble.
This item is not sold commercially. If you’d like a 3D print service, please contact us. Here is our website for reference: https://www.kerosmm.com.