Frosty The Snowman Multi Color MMU 9 colors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is our version of Frosty from classic Christmas cartoon Frosty the Snowman remixed for color printing.
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 122
- Wydruki
- 1
- Wyświetlenia
- 739
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is our version of Frosty from classic Christmas cartoon Frosty the Snowman remixed for color printing.
If you need any 3D design or modeling, contact us at [email protected]
Thank you again for checking out our designs and have a wonderful day. God bless
Print instructions
Category: Sculptures Print Settings
Printer Brand: Prusa
Printer: i3 MK3 MMU 2
Rafts: No
Supports: Yes
Infill: 10%
Notes:
I scaled to 15%. You need to scale after you import all the parts into the slicer.
I suggest printing the Model in parts to reduce the amount of waste and increase the number of possible colors. However you may print it all at once too. The print divisions I suggest are
- Lower Body - Support build plate only
- Head with eyes, nose, pipe - Support build plate only
- Hat with band, and flower - Support everywhere but change the threshold to only support the flower
- Broom Top, handle top, Base, brush base, tie - Sweep facing down with supports
Broom Bottom - ~3mm Brim
With these configurations the waste towers will total ~51g (I used some large transitions, ~300 for black to white and some other colors)
If you print all at once the waste tower will be ~172g - over 3 times the waste, about 3 times the overall print time, and fewer colors.
The colors I used were: Inland for white and dandelion, AIO Robotics for the grey, pink,
and blue, Hatchbox for the black, Fiberology Vertigo for the eyes, Amz3d for the red, SnoLabs for the brown, and MadMaker Filaments for the tan.