60mm Large Electronics Air Vent
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Air Vent is similar to the Bud IPV-1116 but designed to 3d Printable.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 250
- Wydruki
- 0
- Wyświetlenia
- 1561
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This Air Vent is similar to the Bud IPV-1116 but designed to 3d Printable. This vent will fit into an 2.5" drilled hole.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
10
Filament: Overture PETg Any
Notes:
Printing this is pretty easy but will require PETg and TPU. See image how I used supports due to large bridging.
Print Information =================
Vent:
Vent should be printed upside down (threads pointing up).
Control the speed and the layer height. Layer Height: .2mm Speed: 35m
When it comes to supports, I used painted on supports in Prusa Slicer. You want as little supports as possible, but still with enough to not have too bad sag.
Category: Electronics