Compact metal saw handle v1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mod a classic metal saw to a compact type one. (there is also an updated version available)
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 337
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Also check out the updated version: https://www.prusaprinters.org/prints/145827-compact-metal-saw-handle-v2
Cut the standard handle off (of course ONLY after testing if the new handle fits - these saws look same to me, but it doesn't mean all the dimensions are), reverse the saw blade, replace the wingnut with a normal nut and mount this grip. Use heat-set threaded inserts and m4x16 internal hex cylinder screws to assemble. Both end s of the screws/insert should end up being pretty much flush with the surface. This is nearly as compact as a metal saw can be. The grip is designed to be held by three fingers, with the index finger along the bow to provide you with a better feel for direction and feedback. Guide the front as usual.