1 / 10
Haunting Spirit - Can Holder / Beer mug — zdjęcie 1
1 / 10

Haunting Spirit - Can Holder / Beer mug

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Can Holder for 0.5L Cans (12oz+330ml can inserts)

Ocena
0 / 5
Polubienia
22
Pobrania
105
Wydruki
0
Wyświetlenia
269
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Haunting Spirit can holder

  • Fits long EU cans with a capacity of 0.5L. You can also use my insert for 12oz or 330ml (slim) cans (link below)
  • Recommended print settings: PLA, 0.2mm layers, 2walls, 8%gyroid, brim, Custom (32°) supports - only 17g - (pic below)
  • Print upside down!  (pic below)
  • Free licence

I recommend adjusting the supports manually only at the eyes, mouth, and handle. only 17g of supports! 

Here is the link to my model of the insert that you can use in 0.5L holders with your 12oz , or 330ml slim cans, and 10mm riser if you want better access to the top. They are scalable, so you can make them smaller or larger in your slicer.

https://www.printables.com/model/1322047-can-holder-riser-inserts-12oz-slim-330ml-scalable

Happy printing:)

Tagi