Base for Small Propane or MAPP Gas Tank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A base to stabilize a small tank and torch.
- Ocena
- 3 / 5
- Polubienia
- 16
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 612
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This is a base to help stabilize a small tank/torch combination, when you need to use it hands-free. This is for a tank 74.25mm in diameter.
Although these small tanks will stand upright on their own, they tend to be top-heavy and prone to tipping. While this base does not eliminate that problem, it does reduce the chance of tipping significantly.
Assembly and Use
The prints consists of a Base and 3 “Springs” to hold the tank in place (and allow for some minor variation in tank diameter). The Springs are simple inserted into the holes in the Base (see photos).
With the springs in place, simply insert the tank so as to expand the Springs; inserting the tank at a slight angle is helpful.
Print Instructions
Print in PETG using the 3mf or gcode files provided. In general :
Print the base with :
- 5% rectilinear infill
- concentric top and bottom infill
- I used a modifier to remove infill from the upper section of the base and to increase the number of perimeters
Print 3 of the “springs” with :
- 0% infill
- I printed the springs in a different color from the base just for fun, but of course this is not necessary
CAD
The OnShape 3D CAD files for this are here: