1 / 1
Remix - Prusa Core One Magnetic Top Cover, for 8x2mm magnets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Changed the magnet holes to support 8x2mm magnets instead.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 437
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (12)Powiązane
Just changed the holes to support 8x2mm magnets instead.
(Only the Front, Back and Side parts).
Magnets are press fit into place.
Also added the little washers I used for the bolts.