Pumkin Cat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a pumpkin with a cat's face.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Here is a ‘spooky’ pumpkin with a cat's face. When you remove the top, you can insert a candle into the opening provided. A battery-operated candle is recommended.
Since the original file has become very small, I recommend enlarging the pumpkin. In the picture, it is 110% in size. In addition, supports must be used here because otherwise the upper teeth will be printed in the air, and it never worked for me in my first attempts (which is why the teeth are so wide).
I used Sunlu's orange filament (PETG) and the ears are translucent green from Anycubic (also PETG).
In size 110%, the lower part takes 1 hour 35 minutes. The Cat_Head takes just under 1 hour when printed in two colours.
Happy Halloween. And have fun with the cat :)