LED Medieval Torch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flickering medieval style torches using LED tealight candles from Dollar Tree.
- Ocena
- 5 / 5
- Polubienia
- 114
- Pobrania
- 166
- Wydruki
- 1
- Wyświetlenia
- 802
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
Behold, an extremely cheap way to bring your decorations to the next level.
All you need is a three-pack of Dollar Tree LED tealight candles.
I also have a wall mount for the torch which can be found here: https://www.printables.com/model/1437783-wall-mount-for-medieval-torch
I printed it with a 0.2mm layer height and 5% infill. The Torch_jar was printed using the spiral vase mode with 3 bottom layers and zero top layers.
This model was designed to fit onto light saber handles, but will fit onto a dowel rod as long as it's 30mm. I can change the size of the hole to fit different sizes as requested. I have also included a handle.
Assembly is fairly simple:
Step 1: glue one of the sides to the base.
Step 2: glue the first ring onto the side, lining it up with the lowest bump.
Step 3: Glue on the second ring, lining it up with the other bump.
Step 4: glue on a second side opposite the first.
Step 5: glue on the other two sides.
Step 6: turn on the three tealights and place them inside the torch.
Step 7: insert the jar, bottom up, into the torch.
Slide the handle in and your done!