Infinix 15W Magnetic Wireless Fast Charge Pad Horizontal Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Horizontal phone stand designed to house Infinix 15W Magnetic Wireless Fast Charge Pad.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 208
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
A week ago, I started working for a new employer and, to my surprise, I received a company phone – an iPhone 16. Since its use is limited to confirming logins to company systems, I thought it would be a good idea to have it on my computer desk.
Looking at the prices of Apple's original MagSafe chargers gave me a stroke, so I purchased an inexpensive Infinix 15W Magnetic Wireless Fast Charge Pad (see here) and designed a horizontal phone stand that would be low enough not to disrupt the layout of my desk.
Although the stand is designed for the aforementioned charger, it should fit any other wireless charger with a diameter of ~64mm and a thickness of ~7mm. All walls are 3mm thick, and the cable cutout is 12mm wide and should easily accommodate the original cable that came with the charger brick. Cables with longer plugs may present a problem, however.
This model needs to be printed rotated, with organic supports on build plate and brim, as shown below.

For more detailed information, see technical drawing under Drawings directory. All dimensions on drawings are expressed in millimeters.