1 / 1
oxo Large Glass Salad Spinner six-sided internal latch part — zdjęcie 1

oxo Large Glass Salad Spinner six-sided internal latch part

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

One of the internal teeth for mine broke off, making it to where it would not stay together. Give me a better name?

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
43
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

If you find any of my designs helpful, please send me a tip, or a donation on any of the donation apps: @MATTxMERCY. Kind words are also appreciated.

One of the internal teeth for mine broke off, making it to where it would not stay together.
If you have a better name for it, lemme know.

Forgot to snap a picture of the finished project for a "make" before I put it together, and don't feel like taking it apart (at the moment)

I technically printed at 220C instead of 215C - 70% infill, Triangle pattern - but I think 215C would result in less stringing. Build Plate @ 65C

I used Creality Hyper PLA for my print: https://www.amazon.com/dp/B0BXP8744V,

Used the High Quality preset in CURA for Ender 3 Pro.If you find any of my designs helpful, please send me a tip, or a donation on any of the donation apps: @MATTxMERCY. Kind words are also appreciated.

One of the internal teeth for mine broke off, making it to where it would not stay together.
If you have a better name for it, lemme know.

Forgot to snap a picture of the finished project for a "make" before I put it together, and don't feel like taking it apart (at the moment)

I technically printed at 220C instead of 215C - 70% infill, Triangle pattern - but I think 215C would result in less stringing. Build Plate @ 65C

I used Creality Hyper PLA for my print: https://www.amazon.com/dp/B0BXP8744V,

Used the High Quality preset in CURA for Ender 3 Pro.

Tagi