1 / 5
Shashimono frame parts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These parts allow you to use commonly available garden center supplies to make a sashimono frame for a banner.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Print these parts to create a sashimono frame.
Parts Needed:
- EL Bracket
- Top Eyelet
- Side Eyelet
- Large Heavy Duty Garden Stake (6 or 8 feet in length)
- Small Garden Stake (3 feet in length)
Instructions:
- Print all the parts. They can be placed on the bed in any orientation. The bracket with be stronger than the garden stakes regardless of orientation. For the best-looking results, orient the EL Bracket at a 45 degree angle and use supports with a .1mm gap. because the part is a cylinder the contact surface with the bed when oriented at a 45 degree angle is a point and the part will want to move with loose supports.
- Cut off one end of each of the garden stakes with a hacksaw or grinding disc. I recommend cutting the point off the large stake because there is more smooth tube on that end and the bracket is designed for a snug fit over the smooth part of the heavy duty stake. the small stake has nubbins all along the length and the bracket was designed to accommodate those.
- Put the side eyelet on the large stake and the top eyelet on the small stake.
- Insert both cut ends into the EL bracket.
- Your Sashimono frame is now complete. Hang you banner and enjoy.
- 30"x40" flags are readily available from print on demand sites and fit the frame perfectly