Rabbit R1 - back case for battery upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this back case to house a 4000mAh 3.7V 125050 battery.
- Ocena
- 0 / 5
- Polubienia
- 5
- Wydruki
- 0
- Wyświetlenia
- 290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Standard Digital File License
I made this back case to house a 4000mAh 3.7V 125050 battery.
Detailed guide: https://www.reddit.com/r/Rabbitr1/comments/1o00jn0/battery_upgrade_how_i_turned_my_r1_into_a_big
___
Important Hint:
The grill is kind of a "hack".
I did it by setting that one part to not print the top and bottom layers, but only the infill. There are multiple possible reasons if it turns out solid for you:
the filament comes out too thick because of a thicker nozzle or line width setting
your slicer doesn't have the infill pattern I choose and it defaults to a different one
your slicer doesn't allow removing top and bottom for a part
your slicer doesn't support printing a part with different settings than the other parts
If you are having trouble, reach out to me on reddit with screenshots and we can work it out.
___
Improvements TODO:
Need to figure out a way to cover the camera hole