Woody Guthrie hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
But on the back side, it didn't say nothing... This land was made for you and me
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Project: woodyg2cut.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x183.59mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
Filaments Used:
#000000 PLA+ Esun Black Transmission Distance: 0.1
#e8e6d0 PLA PolyLite Natural Transmission Distance: 21
#4c4e52 PLA Overture Cement Gray Transmission Distance: 0.4
#74777d PLA Overture Light Gray Transmission Distance: 0.5
#cfe3c0 PLA Prusament Galaxy Silver Transmission Distance: 6.4
#ddd7c7 PLA+ Esun Bone White Transmission Distance: 4.2
#ffffff PLA+ Sunlu White Transmission Distance: 5
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Natural
At layer #12 (1.04mm) swap to Cement Gray
At layer #14 (1.2mm) swap to Light Gray
At layer #16 (1.36mm) swap to Galaxy Silver
At layer #19 (1.6mm) swap to Bone White
At layer #23 (1.92mm) swap to White for the rest.