Laptop Stand (without initials)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Print two braces. The hook of the brace connects to the outside of each leg. I uploaded a brace that is 240mm long (that's what is seen in the pictures) and another that is 180mm in case you have a smaller print bed.
I designed this modular laptop stand for my girlfriend's work from home station to keep her webcam at eye level. I originally made it with her initials built into the design (see photos), but removed them before uploading.
It's designed with .5mm gap where the braces connect to the legs. It's a tiny bit loose printed on my Artillery Sidewinder X1, but still stays together without any glue and is plenty sturdy. If needed I can adjust the tolerance and re-upload or you can use glue if you want a semi-permanent assembly.
Print Settings
Printer:
Artillery Sidewinder X1
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
20%
Filament:
Inland PLA
Black
Category: Office