LayersFactory
Zgłoś model
1 / 5
SciFi Lantern — zdjęcie 1
1 / 5

SciFi Lantern

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyWydruki i komentarzeRemiksyKolekcjePowiązane

A Sci-Fi style Tube Lantern I designed to fit 6" glowsticks. Threaded ends allow for easy glowstick replacement. Make it your own by trying different color filaments.

Possible prop ideas I've thought of:

  • Radioactive containment cannister
  • Futuristic energy core
  • Bio-Weapon storage vessel

Assembly is very easy, simply insert the glowstick into one of the End Caps, twist on the Center Tube and finally close it off with the other End Cap.

Note: End Caps are different to match the different ends of the glowstick.

DIY Add-on:
Want to seal off your lantern and give it a more finished look? I designed the lantern with the intention to add an easy DIY clear cover tube. Simply cut a 135 mm cylindrical section from the center of a 20 oz smart water bottle (approx. 66mm diameter). It should slide snuggly into the Center Tube.

Print Settings:

Nozzle: 0.4 mm
Layer Height: 0.2 mm
Infill: 15% Gyroid
Wall loops: 3
Supports: Tree (auto)
Printed with: Overture PLA+ Black

Tagi

lamplanternvialtubeenergyscifiglowstickradioactivecontainmentcannister