OSB Adapter for Sanwa 24mm Snap-ins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows the use of MX switches and the OSB PCBs with Sanwa 24mm snap-in buttons, non-destructive and fully reversable.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter was created from scratch and allows the use of MX switches and the OSB PCBs with Sanwa 24mm snap-in buttons, it is also non-destructive and fully reversible.
This variant is derived from my other adapter for 30mm snap-ins.
Versions
V1 - Clips part of the main body - Not included due to durability concerns
V2 - Separate clips for full plunger travel
V3 - Separate clips for reduced plunger travel
Testing was completed with Outemu V3 Silent Peach and Kailh Speed switches so a couple of stem options have been included.
I have included a snip showing how the parts need to be oriented for printing in the slicer.
When assembling you may need to line up the clips and firmly (but gently) push down on a flat surface for them to slip in place. They are designed to be a nice tight fit.
This was Inspired by this mod from Tài Alt.