Moxon antenna arms for smaller printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are for the Moxon antenna. They are from the design inspired by DL2MAN. Print in PETG for strength.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Best use for printing is PETG as it gives stronger support for the antenna if you are out doing some radio activity on the VHF band. Print x4 for the arms and go to DL2MAN for the supports and all credit to him for his model making in this hobby. Best use for printing is PETG as it gives stronger support for the antenna if you are out doing some radio activity on the VHF band. Print x4 for the arms and go to DL2MAN for the supports and all credit to him for his model making in this hobby.