1 / 4
Magene speed sensor S3 holder - bicycle 16mm and 32mm shaft
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For 16mm and 32mm shaft (used on Scott Speedster and Scott Addict).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 1
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Magene sensor is flat so it's not optimal while mounted on the wheel shaft. Holder has a 16mm and 32mm radius on one side to sit firmly on the shaft and on the oposite side it's flat, adjusted to sensor. If you need other shaft sizes let me know to load more models.