1 / 7
Philips Hue Dimmer Switch v2 Mount for 80×80 mm Light Switch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keeps your Philips Hue Dimmer V2 mounted and prevents people from cutting power to your lamps via the wall switch.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 550
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (15)Powiązane
⚠Disclaimer:
A small metal plate needs to be glued in the back so the dimmer v2 holds inside the recess with its magnet.
📐 Design & Fit
- Precisely tailored for the Philips Hue Dimmer V2 — it fits snugly without gaps
- Compatible only with 80 × 80 mm wall switches, up to 14.5 mm depth
- Designed to be printed flat with the dimmer switch recess facing up for best fit
- No mechanical parts — just a simple clamp-on mount
🖨 Print Settings & Notes
- Print orientation: flat, with dimmer recess facing upward
- Materials: e.g., PLA
- Settings: 0.4 mm nozzle, 0.2 mm layer height, 15% infill
- Supports are needed for this print ⚠
🧩 Assembly & Add-ons
Glue a thin metal plate inside the rear recess (the one against the wall switch cavity) — it adds friction and ensures the dimmer holds firmly
Just press the mount over your existing wall switch — done
ℹ Purpose & Note
This mounting plate stops users from cutting power with the standard wall switch. Your Hue Dimmer stays fixed, functional, and always ready 💡