1 / 1
Adventure Force Boxer Pro Low FPS Cages (WIP but funcitonal) — zdjęcie 1

Adventure Force Boxer Pro Low FPS Cages (WIP but funcitonal)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A couple of flywheel cages I put together by modifying the Daybreak DZP-MK3 cages. Only in 42.5mm and 42mm spacing. WIP

Ocena
0 / 5
Polubienia
9
Pobrania
7
Wydruki
0
Wyświetlenia
344
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Edit 10/11/25: I've contacted Kuryaka about getting the source files. Depending on how much of a nightmare they are to modify, I may be able to get those motor mounts adjusted, but I don't want to make any promises. As it stands, you're likely better off either waiting on an official Daybreak cage/one built from the ground up for the Boxer Pro, or using the ZTUN posted by DMF. That avoids the feeding issues this cage has as it's still the stock cage, but depending on your print settings/what battery you plan on running it may not bring your blaster down to the correct velocity (in my case, running on a 3S, the 120 version hits 130-140. I do believe it was designed for a 2S though, so if your Boxer runs reliably on one of those definitely give it a go).

The Boxer Pro is a really sick blaster, but as an HvZ player, I was a bit sad to see that even on a 2S, this thing was hitting upwards of 150FPS. I realized the Boxer Pro uses a cage with very similar screw hole geometry to the DZP MK3, and being that I really want to use this at Mall Mutation Madness, I started messing around with the normal MK3 cage, only to realize it causes some flex in the frame, leading to it being canted and darts fishtailing. I do not have it in me to build a flywheel cage from the ground up, let alone with the time constraint of MMM, so this was the next best option. The fit isn't perfect, and it takes a bit of force to get it down on the pegs properly, but the darts don't fishtail with the current iteration most of the time which is all I wanted. With 3S lipo, the 42.5mm cage, OOD Valkyries, and Kuryaka Kepler wheels, this hits right around 100FPS. I have not at the time of writing this tested the 42mm cage, but will in the coming days. I do plan to continue working on these a little more, but there won't ever be versions for different levels of crush as I have no use for those. The only other alterations I may make are adding a section to fill in the section of the shell right behind the cage, as I've found the belt loves getting stuck on that, but I'm not sure it'd be better with that. Ideally, I'd move the motor mounts back a couple of mm (as in the stock cage, where they're literally as far back as possible to ensure the roller has to do less work), but without the source files I can't do that. 

Tagi