Core One / Core One L Louvered Exhaust Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple louvered exhaust cover to keep dust out and help keep heat in.
- Ocena
- 4,5 / 5
- Polubienia
- 42
- Pobrania
- 112
- Wydruki
- 2
- Wyświetlenia
- 651
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple louvered exhaust cover for the Core One & Core One L. Helps keep dust out and heat in.
It's not airtight but it does help with chamber heat up time and helps add a few degrees to the max chamber temp.
This is designed for 10mm x 3mm magnets. 4 total.
***UPDATE 2*** After nearly a year, I decided to give this model some love and added a version for attaching with M3 bolts. I recommend M3x14 SHCS. Everything else remains the same.
***UPDATE*** Added version for 6mm x 3mm magnets. 4 total.
Recommend printing in PETG or ASA/ABS. PLA may hold up since the exhaust is right on the edge of softening temp, but I didn't test it.
The magnets are press fit and fit tightly. I didn't use super glue, but a drop may help. Recommend at least 3 walls due to the press fit of the magnet.
Since the Core One L has an aluminum back panel, the magnets won't work. I recommend using VHB tape to attach.
No supports needed.
Gently flex the louvers and install from the bottom up, from the front side. Ensure they move freely. I found that sometimes PETG will leave some small blobs on the louvre pivot, but a file or hobby knife will take care of that.