EVGA XR1 Lite printable case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable case for the EVGA XR1 Lite.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
The screw holes in EVGA XR1 Lite's case somehow disintegrated internally, leaving all the components inside loose. Luckily the board itself is fine so I went and designed this printable version.
The big square hole in the bottom half of the case is for the plate metal weight that the XR1 had in it. You don't need to install the weight, it's completely optional. If you choose to install it, please cover it in kapton tape or something so you have no risk of shorting out the board in case the weight gets loose.
BOM:
x4 M3 hex nuts
x4 M3x20 bolts
Recommend printing in PETG or ABS since the device does produce some heat. But PLA might be ok.
Repair, don't replace!