1 / 4
Reusable 135 film cassete v2 (24 exposures)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a better reusable cassette
- Ocena
- 4 / 5
- Polubienia
- 6
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 268
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- GNU General Public License v3.0
This is a better version of this cassette. Just plain easier to print and does not require glue
BUT
- The outer shell should be printed with 0,4 line width. you can try to go thicker, but i can't assure that the slicer will slice the extremely thin wall (even with Arachne)
- I designed this with 0,2 mm layers in mind, but that is not a strict requirement
- I only tested it in PETG. PLA may be a little brittle for the flexible parts, but it should be ok
- The casette has less space for film than the standard
- The outer shell fit is very tight the first time you fit it. I could have increased the tolerances, but it just fits into the cameras i have. Once it breaks in (litterally - the outer shell splits at the base) it is ok
If you have any problems with this file print the old one. The old one is designed poorly, but closely follows the standard (this standard in particular). The orientation the model is intended to be printed in is in the 3mf file
p.s. please dont mind the abysmal print quality on the photos