bicycle wallhock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a simple bicycle mount to attach your bike vertically on the wall.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
This wall hock for a bicycle has two different base plate to choose. One with two mounting points for screws and one with three screw points for a more stable connection to the wall.
The hock is attached to the base with a M6x22mm-screw which does not need a nut, because the diameter on the backside of the base is undersized to screw into it.
But also a M5 with a nut is possible to use as you can see in the picture, it just has a bigger play with the hock. I dont had a M6 long enough ready for this.
I printed it with PETG.