NOXEA Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simplistic multi component lamp
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
NOXEA Lamp
Also on Makerworld with files for Bambustudio
A modern lamp design for your living space. Some time ago, while waiting at the doctor’s office, I came across a lantern design in a home decor magazine that inspired me to create this 3D-printed LED lamp. I believe it might have been the Olbia by Lambert. Only hardware you need is the LED Lamp Kit MH001 by BambuLab.
Printing Instructions
I highly recommend using the supplied .3mf files for Prusaslicer, as it contains the optimized settings.
While the base can be printed in default settings, both the transparent shade and the lighting cone require specific adjustments to ensure proper functionality:
Lighting Cone:
- 13 solid bottom layers in Vase Mode
- Outer Wall Extrusion Width: 0.6 mm
Transparent Shade:
- 13 solid bottom layers in Vase Mode
- Optional: Fuzzy Skin for outer walls with 0.2mm Point Distance and 0.1mm thickness. As seen in some Pictures.
For maximum transparency of the shade, you may achieve the best results by slowing down the print speed, turning off the fan, and slightly increasing the print temperature.
I used PETG for the lighting cone and transparent shade but PLA should be fine as well!
Assembly Instructions
- Mount the LED Lamp Kit light source to the Base
- twist-lock the lighting cone into place
- twist-lock the transparent lamp shade into place