Camp Fork / Hotdog Stick Wall-Mounted Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
[Coghlan's-branded #9195) Camp Fork / Hotdog Stick Wall-Mounted Holder / Storage Rack
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple wall-mounted rack for holding [Coghlan's-branded #9195) Camp Fork / Hotdog Sticks. This rack does have a 2-degree slope to [hopefully] keep forks up against the wall. I have two models - a 1" Depth and a 1.5" Depth. I printed the 1.5" one - and it could hold way more forks than I have (or will have). Screw holes are designed for #10 screws - choose the appropriate type for whatever you are mounting this against.
Print in your choice of materials. Recommended to print in the same orientation as mounted on wall (just so layer lines wrap around to the mounting screws - better strength instead of having vertical layer lines which could shear because of fork weight). I printed in ABS 0.2mm layer height with supports (probably not needed)
Hopefully this will permanently solve the forks falling-off-the-nails-in-the-wall problem…