Waveshare ESP32-S3 Zero box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This model is to provide a good looking functional case for the Waveshare ESP32-S3-Zero board to be operated by AA batteries.
While this was specifically developed for the [ESP Rowing Monitor](https://github.com/Abasz/ESPRowingMonitor) that provides performance monitoring for rowing and kayak ergometers, it can be used for other projects using this board.
This is a multi object 3mf file so re orientation is necessary, but it can be fully printed without supports.
I recommend 0.12 layer height so small details like the locks work properly. The cable relief should be printed in soft TPU, while the tiny cover for the LED from transparent PLA. Alternatively they can be left out.
Terminals are sized for these (short 12x12mm and double 28x12mm): https://www.aliexpress.com/item/1005006694636404.html?spm=a2g0o.order_list.order_list_main.4.44781802kxwYNu