Soldering Fume Extractor Filter Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soldering Fume Extractor to be used with carbon filters and pc fans
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
used 120 mm pc fan(s), an old power supply, and a toggle switch to go with frame. Power supply definitely overkill, but I had it laying around and it was easy to plug everything into it. The only thing I purchased were the filters.
These are the filters I used with it
https://www.amazon.com/dp/B07WG24L8Z?psc=1&ref=ppx_yo2ov_dt_b_product_details
Glue FrameSupport to frame under the bottom fan(s) for stability. This was cut from the model to eliminate excessive supports. Also glue because I'm lazy...
Uploaded 1 fan frame for those who don't have a large print suface. 4 fan frame barely fit on a CR-10, having to remove most binder clips.