Fokker Dr. I Triplane, Radio controlled
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a beautyfully scaled and 3D printable version of a Fokker DR. I triplane.
- Ocena
- 0 / 5
- Polubienia
- 40
- Wydruki
- 0
- Wyświetlenia
- 1413
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Standard Digital File License
Fokker Dr. I
This Fokker DR.I model in 1:12 scale mirrors its legendary namesake: short take-offs, impressive climbs, great nimbleness in the air—but stays gentle and easy to control.
Hand launches are simple; ground launches are trickier because of the old-school fixed tail skid and high centre of gravity. A gyro-supported receiver (always smart for this size) is the best way to smooth things out.
For detail fans, the kit features authentic rudder linkage, a pilot figure, loads of extra fittings, and even the possibility of a spinning dummy radial engine.
Around 90% is printed from Lightweight-PLA (PolyLight by 3D-LabPrint gets top marks), plus flex material for wheels, and standard PLA for the rest.
Construction is straightforward: besides RC electronics and power, only a handful of accessories are needed.
Specs:
| Scale: | 1 : 12 |
|---|---|
| Wingspan: | 600mm |
| Length: | 485 mm |
| Printed part weight: | about 220 g |
| AUW.: | around 400 g |