Aquarium - Fish Feeding Ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fully print in place model. As a result of many failed revisions, this worked out to be the best solution.…
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 193
- Wydruki
- 0
- Wyświetlenia
- 532
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a fully print in place model. As a result of many failed revisions, this worked out to be the best solution. Because of the poor orientation, the model has been strengthened in strategic locations. Unfortunately, All supports are required. I would advise tree supports. The supports in the arm and hinges require a few full range motions to release them all.
Edit: Added the step file and a screenshot
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Infill:
20
Post-Printing
Supports
Carefully rotate the arm up and down a few times to break and release the supports in the pins.
Category: Pets