Ikea Stadis Battery Organizers (FIFO)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As a way to better organize batteries using the popular Ikea Skadis Pegboard system!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
An easy 3D print that helps organize batteries using the popular Ikea Skadis Pegboard as a way to hang on the wall. It also can be independant and sit on a shelf, desk, drawer or anywhere else!
Each design comprises of a left and right side-panel (universal) and then 3 parts specific to the battery type. A left and right shell and then a front cover that shows the type of battery stored in the unit. Currently I have models and designs for AA, AAA and C batteries. I think D cells could work as well I'm looking at designing a drawer or other system that would use the same side panels but have not had time to do that so far!
Print Parameters:
Material: PLA or PETG
Support: Enable on left and right panels, all other models print without
Infill: Gyroid - 20%
Layer Height: 0.2mm or 0.32mm
Nozzle Diameter: 0.6mm
Notes: for front plates, use 2 colors, can print on 1 print bed 3 at a time.
Assembly:
M3 Heatset inserts onto both sides of the Left Main Body for the Battery Frame
M3x10 (can use smaller but this will work for all sides)
Cleats require M3x10 and Nyloc M3 nuts
Cleats require Skadis to be removed from wall to put on backers for cleat, there are other designs out there for french cleats that work (such as this design by Superjanneke: https://www.printables.com/model/776111-french-cleats-for-ikea-skadis) that do not require removal; however I wanted to avoid having to use different screw if I could