Unifi Express 7 Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy-printing fitted Unifi Express 7 Wall Mount with vent holes.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 204
- Wydruki
- 0
- Wyświetlenia
- 603
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
Wanting to move my Unifi Express 7 from a shelf to be wall mounted near ta switch and the WAN and didn't find something I particularly liked so I made this.
This version is meant for the front to the right and the wiring out the back to the left, hence the lower sides. If you'd like the reverse, just flip the model and you're good to go.
For printing you can leave it as is with the long edge on the bed, supports not needed. This also prints well on it's side if you flip it so that the vents are at the top, but you'll need a printer that handles bridging well.
Lemme know of any modification requests, or just play with the included FreeCad file.