Brompton holder for OnGuard U-Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OnGuard RockSolid U-Lock holder for Brompton handlebar
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Version 2.
After testing on a bicycle, some issues were discovered (the U-lock in the holder rattled), so the new version uses TPU inserts (95A OR 70A) to eliminate the noise. The design of the back of the holder has also been redesigned, removing unnecessary material (the weight has been reduced from approximately 200g to 80g).
It should be printed horizontally, with the three back pieces glued together later with CA glue. The TPU inserts should be printed upside down and also glued later with CA glue.
The holder attaches to the handlebars and is secured with standard zip ties. It doesn't interfere with front bags and allows the bike to be folded normally.
The preferred material is PETG, ASA or something suitable for outdoor use (NOT PLA).
I'm leaving version 1 in the files for reference, but version 2 is much better—so use that.
P.S. This is my first model, so please don't be too hard on me :-)