Boeing 747 - For Book Presentation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For our book presentation we chose the book Flugangst by Sebastian Fitzik and the Boing 747 as our project.
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 273
- Wydruki
- 0
- Wyświetlenia
- 3221
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
For our book presentation, we chose the book Flugangst by Sebastian Fitzik. We were then asked to build, develop, and plan something related to the book. We decided on the airplane from the book, because it made the most sense to us. Unfortunately, we didn't find the right type of airplane from the book, so we decided to go with the Boeing 747 because they have the best models of it. So I edited the airplane so that it consists of three parts and fits on my Ender 3. In addition, we added the special feature that our documentation for our presentation was not next to it, but pushed into a hole in the plane. To make it easy to get to the documentation, we put magnets in the area between the tail and the center section, so you can remove the tail and take the documentation out directly.
This is the book we presented:
On the right and left side is applied the message that the terrorist wants to enforce in the book.
We edited the .stl by me converting the .stl files in Fusion 360 to .ipt files. The engine is a bit more complicated because I edited the file here so that you can print the engine blades in a different color and then insert them into the case afterwards.
Additionally, the size of the files is not really right, just scale the size to your liking but make sure they all have the same scaling.
I hope you like it.
If you like to, check out my other designs too!