OpenRC F1 Differential with Belt Pulley
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact 4-gear F1 differential with belt drive, eliminating wobbling using 3 identical bearings.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 435
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
OpenRC F1 Differential: Belt-Driven (Reduced Wobble)
This remix addresses the common issue of shaft sway and wobbling found in many OpenRC F1 differential designs. By utilizing three identical bearings (the same ones used in the front rims), this setup provides a much more stable rotation while switching the power transmission to a smooth GT2 belt system.
Technical Specifications
Power Ratio: 3.75:1
Main Pulley: 60T
Motor Pulley: 16T
Bearings: 3 × MR128ZZ (8×12×3.5 mm)
Belt: 140mm (70 teeth) GT2 Belt Aliexpress_link
🛠 Parts List
To Purchase
Item | Quantity | Description |
MR128ZZ Bearings | 3 | 8×12×3.5 mm |
GT2 Belt | 1 | 140mm / 70 Teeth (Can be printed in TPU) |
GT2 Motor Pulley | 1 | 16-tooth (Standard 5mm or 3.17mm shaft) |
M2 Insert Nut | 1 | Only if printing the 3.17mm motor pulley |
To Print
1× Main_pulley.stl (Requires mid-print bearing insertion)
4× Small_gear.stl (Thingiverse Link)
1× Body_gear.stl (Remixed for tighter axle fit)
1× remixed_axle.stl (Square profile for non-slip left rim)
1× square_wheel_lock_nut.stl (For left rim)
1× 16t_gt2_motor_pulley_3.17_shaft_v2.stl → Requires 1 × M2 insert nuts. The motor pulley is designed for a 3.17 mm shaft (matching my motor). If you have a motor with a 5 mm shaft, you’re in luck—standard 16-teeth GT2 pulleys for 3D printers should fit.
Rim Options (Choose One Set):
Option A: Original Style
1×
Original-Right-Rear-Rim-With-Gear.stl1×
Original-Left-Rim-Remixed-Square-Axle.stl
Option B: For Silicone Molded Tires
1×
Right-Rear-Rim-With-Gear_silicone_mold.stl1×
Left-Rear-Rim-Square_axle_silicone_mold.stl
The photos show the rims for silicone mold tires, as that’s what I’m using
🖨 Printing Instructions
1. Mandatory Tolerance Test
Before printing the full set, print tolerance_test.stl.
The holes are designed at 12.3mm for a 12mm bearing (0.15mm clearance).
If the bearing doesn't fit snugly, adjust your "Hole Horizontal Expansion" in your slicer.
2. Recommended Slicer Settings
Layer Height: 0.12mm (critical for gears/pulleys) or 0.2mm for larger parts.
External Perimeters First: Enabled (This is vital for dimensional accuracy).
Seam Position: Random (Prevents "zits" that interfere with belt/gear movement).
Supports: Organic supports recommended for Rims.
3. The "Pause at Height" Trick
For the Main_pulley.stl:
You must pause the print at 5.8mm height (Layer 29 if using 0.2mm layers).
Drop the MR128ZZ bearing into the cavity and resume.
Note: If you ever need to remove the bearing, gently heat the plastic until it softens.
🔗 Useful Resources & Credits
Design Tools (OpenSCAD):
Alternative Designs:
For a more professional setup using six bearings, check out this refined differential design.
Pro Tip
If you cannot source a 140mm belt, I have included 140mm_gt2_belt.stl. Print this in 95A or 85A TPU with 100% infill for best results!
Theoretical Speed Calculation
My setup uses a NEEBRC 540 35T brushed motor with a 3S LiPo battery, GT2 belt drive (16T → 60T), and 55 mm diameter wheels.
Motor: NEEBRC 540 35T brushed
Battery: 3S LiPo (11.1 V nominal / 12.6 V full)
Pulley Ratio: 16 T (motor) → 60 T (wheel) = 3.75 : 1
Wheel Diameter: 55 mm → Circumference ≈ 0.173 m
Estimated Motor KV: ~1700–1900 KV (typical for 35T 540 motors)
KV (rpm/V) | Voltage | Motor RPM | Wheel RPM | Top Speed (km/h) |
|---|---|---|---|---|
1600 | 11.1 V | 17 760 | 4 736 | 49 km/h |
1800 | 11.1 V | 19 980 | 5 328 | 55 km/h |
2000 | 11.1 V | 22 200 | 5 920 | 61 km/h |
1800 | 12.6 V | 22 680 | 6 048 | 63 km/h |
⚠ Real-world speed is typically 10–25 % lower due to load, drag, and drivetrain losses.