Prusa Core One - Hygrometer (Multiple magnet dimensions)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hygrometer mount for Core One to measure the humidity and temperature within the enclosure.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 108
- Wydruki
- 3
- Wyświetlenia
- 548
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The housing is for a rectangular hygrometer which you can place inside the Prusa Core One.
I have modelled and uploaded several models to fit the most popular dimensions of Neodym magnets.
This project contains affiliate links, using them means you support my work.
Thank you!
You will need 5 magnets for the smaller dimensions.
You will need 2 magnets for the larger dimensions.
You can support my work and buy me a coffee here: Buy me a Ko-Fi!
It helps more than you know!
Here is an amazon link you can use to find a High Temperature filament to print this project.
Find HT Filaments HERE!
Hygrometer
The hygrometer used can be found and bought here:
Square Hygrometer (Most popular on Amazon)
Magnet size variants
- 5.0x2.0mm.step - Buy 5x2mm magnets here
- 5.0x3.0mm.step - Buy 5x3mm magnets here
- 6.0x2.0mm.step - Buy 6x2mm magnets here
- 6.0x3.0mm.step - Buy 6x3mm magnets here
- 8.0x2.0mm.step - Buy 8x2mm magnets here
- 8.0x2.0mm.step - Buy 8x3mm magnets here
- 10.0x2.0mm.step - Buy 10x2mm magnets here
- 10.0x3.0mm.step - Buy 10x3mm magnets here
Modify the bracket yourself
If you have another type and size of magnet at home I provided two different Stepfiles that can fit smaller or larger sizes or magnets you can modify yourself.
- Core1_Hygrometer Large Blank.step
- Core1_Hygrometer Small Blank.step
Printing instructions
15% infill
No supports
Material choice
You want something that can keep material integrity at 60°C.
At bare minimum you would want something like a proper PETG.
A list of suitable materials:
- PETG
- PCTG
- PA
- PC
- ASA/ABS
Here is an amazon link you can use to find a High Temperature filament to print this project.
Find HT Filaments HERE!