1 / 5
Spare Round Carrier 7mm Remington Magnum — zdjęcie 1
1 / 5

Spare Round Carrier 7mm Remington Magnum

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spare round carrier for up to 4 loaded shells, or for empty brass. Fits 7mm Remington Magnum rounds.

Ocena
0 / 5
Polubienia
2
Pobrania
25
Wydruki
0
Wyświetlenia
102
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I designed a carrier for spare rounds/collect empty cases for reloading purposes. I wanted a better solution than loose cartridges rolling around in my pocket, but in a compact, easily carried form factor that doesn't require carrying the whole cartridge box. As most large bore rifles have a maximum of 4 rounds capacity, that is the quantity I chose.  Designed to reference off of the case neck, reducing the chances of affecting bullet seating depth. The case also fully encloses the bullet end of cartridges that meet SAAMI spec for overall length, protecting vulnerable ballistic tips, etc from damage.

Print in TPU or other flexible filament, this case is designed to be an interference fit on the case neck and a non-flexible filament will not work.

Tagi