1 / 4
Mitsubishi Colt CZ30 - bezel to replace PZ-5000 with modern 7" head unit
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print with PETG or other high temperature material. You need the retainers 2 times and slot it into the main body…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with PETG or other high temperature material. You need the retainers 2 times and slot it into the main body before installation. To mimic the existing trim, print with small "fuzzy skin" enabled in the slice - if your slicer supports it.
Category: Other