Adjustable Bench Vise Jaw Pads
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of https://www.thingiverse.com/thing:1902739 with some added features. My vise has the Hardened Steel…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 484
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a remix of https://www.thingiverse.com/thing:1902739 with some added features. My vise has the Hardened Steel Jaws inset into the cast frame so I needed the ability to add a notch in the bottom lip. I also added an optional cross-hatch pattern on the face to help grip.
IMPORTANT NOTE:
When slicing the model, make sure the settings are adjusted to avoid bridging just in between the spaces of the cross-hatching. I set a 0.8mm deep lattice, then set 5 bottom layers at 0.2mm per layer so the 5th layer was a full layer fill.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
Any TPU
Notes:
Any filament can be used
Category: Parts