1 / 5
Li-ion 18650 battery accu cell welding frame
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printed frame for endless connecting 18650 battery cells together for welding (accu packs)
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
There are a few 18650 battery cell designs out there but nothing i really liked, so i've made my own design.
Improvements:
- Lightweight (only 0,65g per piece)
- better mechanical fixture then the other models
- free spaces between multiple pieces to have room for some wired temperature-sensors
- less time / material needed for the print
Print settings (recommend):
Material: PETG / ABS / ASA / PC … (UL 94-V0 is very good for safety!)
Nozzle: 0.4mm
Layer height: 0.2mm (0.16 or 0.12 is fine too, but not needed)
Support: no
Infill: don't care - will be full material since it is designed for very small amount.
Make sure to connect multiple frames in the right direction!
Check out the images for compare :D