1 / 5
Decorative Candleholder — zdjęcie 1
1 / 5

Decorative Candleholder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A candleholder, bottom screws out but you can also leave it off, good for tealights.

Ocena
0 / 5
Polubienia
6
Pobrania
11
Wydruki
0
Wyświetlenia
71
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Creative Commons — Attribution — Noncommercial

A candleholder, bottom screws out but you can also leave it off, good for tealights.

Inspired by another candleholder on here, the bottom part is not required but its a simple screw on, so if you want to glue the top parts together you can still easily change the candles in the holder by simply unscrewing it.

The different wall parts should be printed in a light filament like white, also for the best result upscale the thickness of them to 0.8.

I printed mine with first layer 0.2 and the rest 0.1 on a QIDI X-MAX 3.

Do not leave unattended!

if you want to make your own stick in things they're 35mm wide, 81.8 in height total with the bottom corners cut out 1.1x2.2mm.

Tagi