1 / 1
The Elder Wand - Wizarding World of Harry Potter - Revision A
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stronger version of @JakeReeves Elder Wand
- Ocena
- 0 / 5
- Polubienia
- 98
- Pobrania
- 364
- Wydruki
- 0
- Wyświetlenia
- 1510
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (112)Powiązane
Filament - PLA Color Changing, Silk
Layer Height - 0.3 mm
Perimeters - 3
Infill - 15% Gyroid
Supports - Definitely
NOTE: Joint was intentionally made tight (0.15 mm clearance per side). You may need plyers to fully seat it.